2026 Propain
Spindrift 5 AL Park Factory
$6,587
Suspension
Wheels
Drivetrain
Brakes
Request confirmed!
We will check if your bike is available at a bike shop near you.
You will be contacted by email to confirm the date and time as well as the bike shop for your test ride.
Expert Review, Specs & Price
Expert Review
The Propain Spindrift 5 AL Park Factory 2026 is a 16.6 kg downhill bike for park laps, and its gravity setup is well judged. Its 16.6 kg weight sits in line with downhill bikes, so shuttle transfers bring no unusual weight advantage. The Fox 40 Factory GripX2 fork has 200mm travel, helping you hold a line through brake bumps and rough landings. Magura MT7 Performance brakes with 220mm front and 203mm rear rotors give you controlled speed into steep park turns. Schwalbe Magic Mary and Big Betty DH tyres add grip at loose corners, while 27.5-inch wheels turn quickly through tight berms. But the 1×7 gearing leaves fewer cadence choices on pedaled transfers between runs. I'd choose this Factory build for riders prioritizing park control; the carbon Spindrift 5 CF weighs 15.5 kg if lower mass matters more.
Pros
- The Fox 40 Factory's 200mm travel helps settle brake bumps at park speed.
- Magura MT7 brakes and the 220mm front rotor control speed into steep turns.
- Magic Mary and Big Betty DH tyres bite into loose park corners.
- The 27.5-inch wheels change direction quickly through tight berms.
Cons
- Seven gears leave fewer cadence choices on pedaled transfers between park laps.
- The 27.5-inch wheels roll less easily over square-edged rock gardens at speed.
Best for :
- Bike-park riders focused on repeated lift-access laps and steep, rough lines.
- Downhill racers who want dual-crown fork travel and powerful rotor sizes.
Not for :
- Riders planning long pedal-heavy days or frequent climbs between descents.
Best used Mountain bike deals
Certified pre-owned · 30-day satisfaction guarantee · Free US shipping
Best cheaper alternatives
At a glance
Terrain
This Propain downhill bike is fairly focused on flowing trails. It is more focused on flowing trails than 83% of the models in its category.
Weight
This model is average in weight. It is lighter than 60% of the models in its category and heavier than 33%.
Geometry & sizing
Available sizes
| Measurement | SM | MD | LG | XL |
|---|---|---|---|---|
| Stack | 605.0mm | 636.0mm | 644.0mm | 658.0mm |
| Reach | 430.0mm | 455.0mm | 480.0mm | 505.0mm |
| Top tube | 553.0mm | 585.0mm | 612.0mm | 641.0mm |
| Head tube length | 100.0mm | 100.0mm | 110.0mm | 125.0mm |
| Head tube angle | 63.90° | 63.90° | 63.90° | 63.90° |
| Seat tube angle | 78.40° | 78.40° | 78.70° | 78.60° |
| Chainstay | 435.0mm | 445.0mm | 445.0mm | 445.0mm |
| Wheelbase | 1196.0mm | 1244.0mm | 1274.0mm | 1305.0mm |
| BB drop | 14.0mm | 27.0mm | 27.0mm | 27.0mm |
| BB height | 342.0mm | 349.0mm | 349.0mm | 349.0mm |
| Standover height | 816.0mm | 829.0mm | 826.0mm | 829.0mm |
| Front center | 761.0mm | 800.0mm | 830.0mm | 861.0mm |
| Trail | 133.0mm | 137.0mm | 136.0mm | 137.0mm |
| Fork rake | 38.0mm | 44.0mm | 44.0mm | 44.0mm |
Measurements in mm and degrees. Values may vary depending on options.
Size guide
Recommendations based on rider height.
Best used Mountain bike deals
Certified pre-owned · 30-day satisfaction guarantee · Free US shipping
Full specifications
Fork
Rear Suspension
Drivetrain
Braking
Wheels
Components
Cyclist reviews
Ratings and comments from owners.
10 seconds of your time help thousands of cyclists.
Support Independent Cycling Expertise
Help us remain a free and unbiased service. By sharing with your network, you help thousands of cyclists.
Thank you for your support!
Improve the comparator
Your feedback helps the community 🚲